Register Setup

The Basic Idea: Registers are pre-defined but you can add and edit them here. Use edit register to change the name of registers and select receipt auto-print preferences and the colors shown on the KDS.

Manage your registers from local stores Web Admin > Equipment > Registers

Your stand is preconfigured with registers. If a register needs to be replaced or an additional register is needed e.g. a Linebuster, learn here how to add and  configure it.

Note: Do NOT have multiple devices on the same register.

Add Register

Enter a name and click Add Register. Find the new register at the bottom of the Registers list below.

Edit a register

Drive Thru hides in POS the buttons to select walk in / to go / delivery.

Select a Swiper Type for your register.

Receipt Printer
Select a printer, set up in Equipment > Printers.

Auto Print
A receipt when a payment is collected, a drawer Report on end drawer, or when a hot swapped drawer's count is finalized.

KDS Colors
Help Baristas recognize at a glance which register sent the order.

Don't forget to save your changes.